help creating a surface

[mikechvz]

i uploaded my file onto the FTP site under the v9 files titled Michael Surface Pocket. In there u will see a pocket with 2 areas outlined in green wireframe to show the areas i need filled. I just cant seem to get it to work right, if anyone does get it, if u could please explain to me how its done it would be much appreciated. Thank u in advance,

[BernieT]

Michael - look at 'Michael Surface Pocket-BT.mc9'

 

I created surfaces from solids in that area, then 'removed boundry' - then cleaned up and created a couple ruled surfs where needed.

 

Look at levels 200 and 201

 

HTH

[mikechvz]

ahhhh, i see exactly what u did now, thank u very much