this is exactly what im talkin about. thanks everyone, great help

no sir we do not have the probing on this machine, and I do not want the Yasnac settings. is the difference between HAAS and Facuc setting in 33 just that the fanuc setting goes back to ZERO in the offsets?

howdy for the past 8 years ive only worked on DAEWOO and DOOSAN machines with FANUC controls of course. I recently took a new job, and they have all HAAS. When I used the FANUC there was G54, G55, G56 etc. Above my G54 setting was a "shift offset 000" where if I wanted to offset my Y +.010 all I had to do was put .010 into the y coordinate instead of adding +.010 into the G54 and changing my TRUE origin. On the HAAS I see there are G54 G55 and so on, but also a G52. do I have to change my actual G54? is there a world coordinate offset that I can make incremental offsets instead?

restarted computer, things worked out

opened a file that ive been working on for a few days with no problems at all, and then....

it was the 'workspace' that got changed. Every toolbar was open and all keyboard shortcuts were turned off, just defaulted it back and all is well. Don't know how or when that was changed, but its new to me, and now I know. Thanks guys

im setting them myself in Customize, I didn't know there were none set. When I press F9, im not getting my origin to toggle on/off , does this need to be setup too?

just had our IT help with an admin install/upgrade to X8 . im setting up some custom colors and my mouse settings, etc. but all the normal key moves like alt+s and alt+a etc. aren't doing their commands, theyre just opening the solids and analyze dropdowns from the top toolbar. never have had this issue with the other versions. Suggestions? thanks in advance

that would work, but no sir, its not a weldment

lookin into this, thanks for the link