About right-click on my mouse in Mastercam mu2

[hle4682]

Does anybody know the reason why I couldn't use the right-click on my mouse in the drawing area after installing MastercamX4 mu2?

[Lars Christensen]

No idea why. I would probably try to do a clean Mastercam re-install. If still having the problem I would update graphics and mouse drivers.....If that did not solve the problem.....Then I would call my Mastercam reseller for help.

[Cannon]

This happens to me when I install english version MU to my tranlated Mastercam. When reseller publishes the translation for The MU and I install it, mouse right button starts working again.

[Reijo Heurlin from Zenex Finland]

I think if you can find the original mtb files and copy them in the config directory, it would be fixed

These files include the category names and some other strings. It does not make your localized Mastercam much less localized even if you would use the original English ones.

The original mtb files are dated somethong like 21st May, 2009. They are not updated by MU1 or MU2.

[Davidsson]

I hade the same problem it was the name in Customize that I had to rename to Right mouse button menu then it wors fin for me.