Keymap file in custom directory

[Matthew]

We just got new computers and I've migrated most of my settings. However Mastercam wants to pull the keymap files from the "C:mcamxconfig" directory, while I want to direct it to "d:mcamxconfig". In the Start/Exit tab of the system configuration it allows me to select a full directory for the startup configuration and the toolbars, but only the filename for the kmp file. Any idea how to point it to look for the keymap file in a different directory?

 

Thanks,

 

Matt.

[Ron Branch @ Verisurf]

On the configuration setting you can assign where you want Mastercam to look for the kmp file.

 

HTH

[Matthew]

I figured it is somewhere in there, however I don't see it. Can you be more specific on where to find it? I can find the drop down to select the keymap file, but not where to set the directory of where it is.

[Ron Branch @ Verisurf]

On the Start/Exit there is the Configuration Folder selection. It is the same place where you put your config and mtb files. If you are wanting to put them all in different place then no you cannot do that. They must all be in the same place where ever you decide you want them to be. Also if you notice that little question Mark in the bottom on the screen when you are on the Start/Exit it will go in greater detail where, how and what each specific part will do and how they work. I think there is about 75 to 100 pages covering all the different configuration settings.

 

HTH