Communications Settings

[Will Slota]

Anybody else have a Bridgeport Series 1 3 axis mill with a Heidenhain TNC 151 control?

 

I need to know the communications settings!!!

[bogusmill]

We have a Bridgeport Series II and did have Series I that's still here but at a different dept. However they both have Boss 9 operating system and communicate the same. So how do I recognize if it has that control? I'll go look and if it's the same I'll tell you how we communicate with ours.

[Oppiz]

We had one of those 20 years ago. I, for some unknow reason kept some of the old files. I really liked that old machine. I want to buy it of the company but they won't sell it to me. Also if I remember correctly the code needed a heart symbol at the end of the program.

 

Here's what I have as far as communication setting:

 

Standard serial protocol

#

# STOPBITS = 1, 1.5, 2

# DATABITS = 5, 6, 7, 8, 16

# PARITY = NONE, EVEN, ODD

# FLOWCONTROL = NONE, SOFTWARE, HARDWARE, BOTH

# RECV_REMOVECHAR = NONE, ASCII0, ASCII0TO31,

#

 

[sTANDARDSERIAL]

RECV_NOSAVEEMPTY= No

TRAN_REMCHAR =

TRAN_STARTTRIG =

TRAN_ENDTRIG =

DEBUGFILE =

TRAN_OMITEMPTY = No

SMT_MODE = No

 

PORTINFO = COM1, 2400, 7E2

COMPORT = COM1

BAUDRATE = 2400

STOPBITS = 2

DATABITS = 7

PARITY = EVEN

FLOWCONTROL = SOFTWARE

DTR_ENABLED = 1

RTS_ENABLED = 1

XONCHAR = 017

XOFFCHAR = 019

PARITYINSERT = 035

USEPARITY = 1

RECV_CRLF = AUTO

RECV_OMMITLINES =

RECV_REMOVECHAR = ASCII0TO31

RECV_STARTTRIG =

RECV_ENDTRIG =

RECV_TIMEOUT = 5

RECV_SENDXON = No

RECV_FEEDSTART =

TRAN_CRLF = 013,010

TRAN_OMMITLINES =

TRAN_DELAYLINES = 0

TRAN_BREAKCOUNT = 0

TRAN_TIMEOUT = 0

TRAN_REMOVEWS = No

TRAN_TABTOSPACE = No

TRAN_FEEDSTART =

TRAN_FEEDEND =

TRAN_WAITFORXON = No