Surfacing

[Joels]

Hello, I am using Mastercam X4 and i am trying to surface say a square and a circle together that is about 1 inch apart and they are 35 deg out of parallel. I remember doing this but it has been a long time, can someone please assist me in remembering how to surface this?

[kunfuzed]

A picture would help. What level of Mastercam do you have? I think you need 2 to do single surfaces and 3 to do multiple surfaces in the same toolpath. You need the solids option to use surface solids, obviously.

[Joels]

I will try to upload the file named joels.mcx. the geometry is on level 8

[Joels]

the file is in mcx4 files on the FTP server

[Greg Williams]

Joel,

 

There are many ways to go about this, I have uploaded my take. I have used Surface net and ruled

 

file is JOELS______GW.MCX

[Joels]

Thank you greg. I downloaded the file and it looks good. I was trying to make the whole thing one surface but i guess that is where i was going wrong.