okuma thread issues

[steveo25]

We have an okuma osp7000L lathe at our shop and when I program a thread cycle it wants to put it in G94 instead of G95, it posts a B value which we never run in our thread cycles, there is no U output for last pass and there isn't a M22 showing up. How can I make these changes or do i need to send my post to someone?

Thank you for the help

[steveo25]

My code looks like this:

N10 G13(2.0"THRD BAR)

N110 G97 S20 M03 M40 P0280

N120 G0 G90 G94 X2.315 Z.09 T1010 M09

N130 Z-.2562

N140 G71 X2.5 Z-2.9 B29 D.014 H.085 M32 M75 F.0833

N150 Z.09

N160 G0 X30.0 Z30.0

N170 M02 P1000

 

And I want it to look like this:

N10 G13(2.0"THRD BAR)

N110 G97 S20 M03 M40 P0280

N120 G0 G90 G94 X2.315 Z.09 T1010 M09

N130 Z-.2562

N140 G71 X2.5 Z-2.9 I0.0 H.085 D.014 U.0024 F.0833 M22 M73 M32

N160 G0 X30.0 Z30.0

N170 M02 P1000

THANKS

[DODGERFAN]

this is what are okuma thread cycle looks like.

2.000 16 thread

 

 

(MACHINE - OKUMKA CADET/CROWN)

(PROGRAM NAME - THREAD EX.NC)

(CUSTOMER - ADD CUSTOMER)

(PART NUMBER - Machine Group-2)

(MODEL # - Machine Group-2.MCX)

(PROGRAMMER - )

(DATE - AUG. 10 2010)

(TIME - 1:38 PM)

(PROGRAM REV - N/C)

(*****)

N1 ( TOOL - 97 OFFSET - 97 )

( OD THREAD RIGHT INSERT - NONE )

(*****)

G0 X20. Z20.

T9797

G97 S200 M03 M41

G0 X2.2 Z.2156

G71 X1.9323 Z-1. B29 D.012 H.0677 M32 M75 F.0625

G0 X20. Z20.

M05

M02

%

[DODGERFAN]

are you programming a dual turrate lathe?

[steveo25]

Yes its a dual turret lathe

[steveo25]

The M32, M75 pattern is almost the same kind of cycle but the M73 takes slightly smaller cuts towards the end for the tool pressure. The program you sent is exactly like the one mastercam spits out right now.

[DODGERFAN]

i'm trying to figure out how to get to my poast

so i can e-mail it

[DODGERFAN]

then we have the same post.

[Greg Williams]

Steve,

 

Which post are you using?

[steveo25]

Im using the okuma osp7000 2x lathe post.

I dont have much experience with editing the posts but work has been slow so ive been trying to learn.

[steveo25]

I found the misc interger that changes this. Thank you for your guys help it is much appreciated.

[steveo25]

Now im having problems finding out how to change the G94 for feed per minute, to G95 for feed per revolution