Convert to 5 axis gouge question

[Mcam Nut]

I am trying to mill a rad on the lower edge of a deep pocket, and would like my tool to be at a 30 deg angle for clearance. I used the convert to five axis under multiaxis toolpaths, and it seems to work great exept on entry and exit, the toolpath wants to gouge the wall. (the endmill tilts then goes right down the side of the wall) I figured there would be a switch to have the tool enter and exit at the tilt angle of my cutter. Is there somthing I may be missing?

[mchin-pilot]

There must be a way with your way, another way is:-

Under Multiaxis, pick the constant Z strategy, play with the settings/parameters. This will do exactly what you want to accomplish.