verify problems

[mmetzinger]

Why is it that when I am in the Verify module and I try to right mouse click and Pan, the part rotates. When I try to right mouse click and use Dynamic zoom, the part rotates. When I try to use the arrow keys to pan, the part rotates. What on earth is going on here???!!!!!

[cadcam]

Are you useing solid mode or standard if it is in solid mode it will do what you expect.

 

[ 09-06-2002, 09:59 AM: Message edited by: cadcam ]

[JSP Mold]

One problem/bug I have run into with the verifier is when I have created secondary WCS's the stock box does not show up correctly. I have a part in which I created a WCS that is rotated 6 degrees around the "X" axis of WCS #1. I am going to rotate the part on my VMC and do some machining from this secondary WCS. The problem is when I try to verify this toolpath the stock is not parallel/perpidicular to the axis's of the WCS. I setup the stock box in my job setup and it looks fine in regular graphic mode.

[Don LePore from CNC Software]

In version 9.1 (Beta 1), you will notice pan, zoom and rotate functions in verification working like they do in wireframe Mastercam. Also, WCS support for stock placement in verification has been added for v9.1 Beta 2.