Post processors

[Claude Pelosse]

I'm looking for a post for a Fanuc 0T C or a trick to stop the mplfan from outputing a G54 !!!

Need HELPPPPPPPPPPP !!!!!!!!!

[cadcam]

What is it that you want it to out put ?

[Guest CNC Apps Guy 1]

Claude,

You can remove "pwcs" in the post in the psof, ptlchg, and ptlchg0.

May I ask why you do not want G54's?

[Chahe]

Hi Claude

Si tu m'envoie ton post je pourrai le modifier pour toi. En passant on est le nouveau dealer educationnel pour votre region.

Salut

Chahe

[Claude Pelosse]

Hi James !!!!!

I do not want any g54 in my program because i dont think our lathes support them .

Thanks everybody for your answers !!!!!

[Allan]

The defaults for the Misc Int. are to blame here. The default usually gives you G50's for your starts of tools (not too many machines like that any more).

Check those defaults in screen configure, if all the feilds are blank you probably do not have a .txt file for your post. You could be missing out on features writen into the post using the msic int / misc reals.

[Guest CNC Apps Guy 1]

Ahhhhhhh, I see said the blindman to his three deaf children. I was not too observant I should have picked up on the T in 0T.

In your post, search for this line:

301. Work coordinate (-1=REF, 0=G50, 1=HOME, 2=G54's)? 2

Currently the default is set to 2, change it to a 0 or 1, most likely 1 and you should be set.

[ 11-04-2001: Message edited by: James Meyette ]

[Christian Raebild]

On a Fanuc 0T, option 1 or 2 should be used (and option 2 seems to be the wrong one in this case). Options -1 and 0 cause either an alarm on the control or a machine crash (well, an undesired movement, it could go to the machine stops farthest from the chuck).

[Claude Pelosse]

Thanks everyone....

I think i solve the problem with the answers i got.