problem with emco f1 mill

[jaysvc]

Hi,

I am having a problem with Emco F1 cnc Mill.

I tried to run a program but when the execution reaches the end of program it continues to start. this continues for ever.Here is my program I am trying to run.(i made it simpler)

======================

N -- G -- X -- Y -- Z

=======================

00 00 100 100

01 00 -100 -100 00

02 M30

=======================

I have also tried this

00 M00

01 00 100 100 100

02 00 100 00 00

03 M30

======================

I would really appreciate any one who can help me to resolve the problem.

 

With regards

jay.

[ropteach]

jay, try the emco users group under yahoo groups. maybe small mills user group. this is second hand info so you might have to do some exploring. we have used our f1 for alot of years here. we have since retired it.the programs look okay. check things on the control maybe a switch or something.

[ropteach]

i have explored the manual for you and have found nothing. could be a switch on the front of the control. did this come about all of a sudden?or right after you loaded the software???

[LNDCAD]

Will your control accept an M02? If it does, try this. It should stop the program at the end, and will probably require a Reset before the next Cycle Start. HTH.

[sammgujjar]

jay u insert in the end of the programm befrore

M30

M28 to stop the all of this compulsations

and also saw on the control a swicth the programm