Installing Mcam x

[ropteach]

Thought everyone should know or maybe you already know, when i installed mcam x i found our hasps would not run with version x.Info on hasps was sent out in the electronic newsletter some time ago.When i called to clarify this at the beginning of summer our local reseller did not return my call.3 emails were sent also to the reseller for clarification and none were returned.Now i am pissed because i just found out from Mastercam that there is a website to register the old hasp and then they will send out a knew one.we have 30 seats and they all have to be updated one at a time through the website wwwsimswap.com.Took me all summer to clarify this and find out we have the none compatiable hasps.Just thought i would save someone the hassle i have gone thru.Looks like we will be using Mcam x in the spring not the fall.

[ArtemanSteve]

Ropteach,

It is very frustrating when the dealers do not respond to questions we ask. I found it is a good idea to go to Mastercams web-site and just poke around, visit the support page periodically this is where I found the sim swap software Haspinfo.exe. Look at it this way, you will have some time to go through X and by then there might be X sp3.

Steve Arteman

 

College Of Lake County

Certified Instructor

[Bullines]

As per the Forum Rules & Guidelines in this thread:

 

11. Issues with your reseller should be resolved directly with your reseller and/or CNC Software. Airing out your issues using the forum will not be tolerated.

 

RIF = Reading Is Fundamental.

 

Thread closed.