New computer specifications

[Ron]

Below are the specs for some computers we are going to bid out for my lab. I don't know what half of this says. My question, is there any known incompatability issues between mastercam X and what we will be getting?

 

Thanks again in advance for the assistance.

 

 

Pentium® D Processor 840 with Dual Core Technology (3.20GHz, 800FSB)

4GB Dual Channel DDR2 SDRAM at 533MHz- 4DIMMs

USB Keyboard

19 inch Ultrasharp™ 1905FP Digital Flat Panel

256MB PCI Express™ x16 (DVI/VGA/TV-out) nVidia GeForce 6800

160GB Serial ATA Hard Drive (7200RPM) w/DataBurst Cache™

Genuine Windows® XP Professional

Optical USB Mouse

Integrated 10/100/1000 Ethernet

Dual Drives: 48x CD-RW Drive + 16x DVD+/-RW w/ double layer write capable

[35K chipper]

Ron, sounds like my Dell that i run MCX L3 solids ,art and autocad on only differencs is my digital flat panel is a 2405 ultrasharp i'm old and blind.

it works great.

[Guest CNC Apps Guy 1]

I'd say that should do nicely.

 

JM2C

[Ron]

Thanks for the replys. In our old computers, we had an NVidea Gforce card and it caused us all kinds of problems with mastercam. We couldnt see the pick boxes (AutoCAD term!) or sometimes even the lines. This time I wanted to ask the pros their opinion and see if there were any known conflicts.