Reverse Post

[Rob B]

I have been reading the thread from last week. I have checked .pst file to see if Q93 is set at RPFAN, which it is. Changed .txt file for my forward post and got the REVERSE option on post menu. It is directly under RUN in menu. When I click on REVERSE on menu it doesn't give me the option to select NC file. What am I doing wrong.

[CNCme]

Sounds correct... Should work...?

[chris m]

Rob

 

As Tony said; that should've worked for you; can you explain exactly what you did and exactly what you see on the screen? If so we may be able to help better.

 

C

[Rob B]

Chris sorry for the delay in reply. First thing that I did was go to my post to check Q93. It was set to RPFAN. Should be good to go. Next I went to my post .txt file. I added the line "RE&VERSE" in the txt file. Then saved file.

Went back to MC-NCulti-PostProc-Change(selected my post)-Reverse appears on Postproc menu. I click on "reverse", it will highlight as if it is active. At this point it should ask for NC file name? But there isn't anyplace to enter file name.

 

I thought that I done everything right when I so the reverse optoin in the Post proc menu. May be it is something simple.

If anyone can help. I would greatful!!!!

[chris m]

Rob

 

Just to narrow things down a little; edit the .txt file for RPFAN to add the reverse option and then change posts to RPFAN and try to reverse a file.

 

Just a theory...

[Rob B]

Chris

Where should the txt files be located on C:. I was thinking that my text file wasn't in the right place. It is presently in the POST folder.

[Rob B]

Chris

I checked RPFAN post everything looks fine.

Got to go to work now will contact later.