Mill V9 Tutorial #3 CURVE 5AX.MC9

[fakanal]

I have down-loaded the V9 Mill Tutorial files from eMastercam.com.

The extructed file "tutorial3_finish" does not back-plot nor verify correctly. The spot drill and the drill does not go through the projected points, in fact they drill in different

locations. Somehow I managed to fix to problem, but it seems it was just pure luck, I cannot repeat the fixing process.

Has anyone had the same problem with this file?

[Mariana Lendel]

Hi, thanks for your feedback.

I fixed the file. The problem was the point selection. I had to delete both drilling operations and to redo them. Something is not working properly if you try to copy the second operation and it seems to be related to the tip control to surface.

Thanks again and let me know if you have other problems.

[fakanal]

Mariana:

Thanks for your reply. I will try what you

suggested. As a matter of fact, I was about to

delete and re-do the drilling operations.

What is your connection with Mastercam?

I've been a Mastercam Instructor at a Machinist

Training Center for 6 months.

Thanks again,

Andy Szekely, [email protected]

[Mariana Lendel]

Andy:

I am in charge with Mastercam training and tutorials development at In-House Solutions for 5 years.