O/T mastercam training courses

[mark l]

Before anyone asks, I have already done a search of this forum and did not come up with anything, but anyways. It is review time here and my boss has asked me to come up with 5 things I want to acompish this year, to include training. Now I went to a Advanced Mill Training course in CT a few years ago and it was very interesting but it was like 2.5 days of drawing and a half of a day of toolpaths, and since I rarly ever draw I would like to find a course about a week long that deals manly with creating diffrent toolpaths, I went to the mastercam site and seen that they still only offer Basic mill and lathe and Advanced Mill, but nothing else

Anyways if anybody out there knows of any other siminars or user groups for M.C. I would appreciate any info

 

[ 02-20-2003, 04:53 PM: Message edited by: mark l ]

[cadcam]

Mark you need to let us know were you are. there are diffrent offers in diffrent areas.

 

Like the two places I teach in Ca.

[mark l]

I am in Arkansas, which I don't really think there is anything close, but my boss told me I could go to anything within practical driving distance, no flying unless absolutly necessary.

[Dan Bedore]

Mark 1 there will be some training in Springfield,Mo next month E-mail me and i will send you details.

[mark l]

Dan thanks a lot that would be great, I emailed you but we have an ancient email system here so if you don't get it in a few hours post back please and I will give you my home email.

[mark l]

Dan I got an email from a Jeff at qtecad. Was this from you? I went to the web site and it showes courses in St. Charles, couldn't find anything about Springfield?