Posting from Wire9 for an AGIE

[MTI]

We are having some serious problems getting MC9 Wire to post correctly for out AGIE, sometimes it does not update the block size at all, and other times MC9 crashes altogether.

 

Has anyone had similar problems?

 

We were running MC9 Wire SP1 prior to today, I just updated to SP2, but I don't think that will change much in the post process.

 

Any thoughts or recomendations would be greatly appreciated.

 

-Rich

[MTI]

I forgot to mention this is on a AGIE Classic 2S

[Andreas Stute - InterCAM]

Hi MTI,

we are working very strong with CNC on the Agie post and fix a lot of problems with the output format from Mastercams Agie Post. You have to ask your local dealer for the latest Agie Post.

Importand are the correct settings in Mastercam. We will try to finish a "user manual" for v9.1.

 

regards

Andreas

[MTI]

Do you have a list of the settings we need to set?

 

I will find out today if we have the latest post for AGIE.