Sodick AQ550 post problems.

[John White WLM&T]

Been working with our local reseller for a while now(CadWire, Toronto,Ontario) trying to get a post working for our SodickAQ550L and MC9.

The problem seems to be only in the 4-axis part of the post. The wire is not returning to vertical before calling the G140 and the machine will alarm.

We have tried quite a few things but there seems to be some sort of cunfusion between Sodick and our reseller.

Our dealer is telliong us that the code that is generated should run but Sodick is telling us that the code will not.

 

Anyone else seen this.

Parts backing up and would really like to find a solution.

 

John White

White-Line Machine & Tool

 

[email protected]

[chad fisher]

I run a aq325 w/ ln1w. When i run in 4 axis i have to create my own lead in and out that are not tapered. What i will do is create 2 lines that are perpindicular to each of about .05 in length. The control wants a couple of staight line dummy moves before and after taper to activate and cancel. I know what your going through because i have already done it. If you want email me and i can send a example or maybe send your part to me and i can send it back.

[John White WLM&T]

Thanks Chad.

 

That's all I needed was a little shove in the right direction.

Problem solved.....

 

So easy when you have the right info.