VBscript for Lathe

[Vishu]

Using Mastercam VBscript is it possible to create a 2d profile, chain it and create the toolpath for a Lathe Job. The VBscript functions only have functions to create operations in Mill. Are there functions to create rough, face or a finish operation in Lathe.

 

Please help me on this. The mastercam VBscript help available is not much clear on this issue.

 

Thanks,

 

vishu

[Bullines]

quote:

---

Are there functions to create rough, face or a finish operation in Lathe.

---

Contour, pocket and drill are the operation types you can create from Mastercam VBScript for Mill/Lathe/Router/Wire. You may also create an operation from an OP9 file.

 

HTH.