V8.1 C-HOOK DEVELOPMENT KIT

[KEVCAM]

Could any one yell me what the new c-hook developmet is all about in mastercams V8.1.

------------------

Kevin Lee

CNC PROGRAMMER

UWO London, Ontario

Canada

[cadcam]

IT IS THE SOFTWARE TO HELP MAKE YOUR OWN C-HOOKS THAT YOU CAN INTEGRATE IN TO MASTERCAM.

Ok did i yell this well enough .

you need to now a little bit about computer programming i would say.

hope this helps a little.

------------------

jay/ aka cadcam

Precision Programming

cnc programming &

Predator reseller

email: [email protected]

web: www.ppcadcam.com

[This message has been edited by cadcam (edited 05-10-2001).]

[This message has been edited by cadcam (edited 05-10-2001).]

[Bullines]

The C-Hook Development Kit on the 8.1 CD contains the following:

- C/C++ header (.H) and object (.OBJ) files

- documentation that briefly describes the functions, structures and variables contained in those header files

The SDK allows you to develop third-party add-in software for Mastercam, providing you are capable of programming in C or C++.

[KEVCAM]

Thanks everyone for your help on the topic. I'm going to look into it a little deeper, cause looks quite useful.

Once again thanks for your replies

------------------

Kevin Lee

CNC PROGRAMMER

UWO London, Ontario

Canada

[cadcam]

now that is a better Definition from Bullines.

------------------

jay/ aka cadcam

Precision Programming

cnc programming &

Predator reseller

email: [email protected]

web: www.ppcadcam.com