get "General machine parameters"

[Masako Nohara Genetec]

Hello,

I'd like to get values from Op.feed rate limits in the "General Machine Parameters" into my application.

 

I have no idea to get this value.

[Mick from CNC Software Inc.]

NEThook, CHook, VBScript?

[Masako Nohara Genetec]

It's C-Hook.

[Zerren Gedeon]

mimi,

 

When are you trying to gather this data?

 

1>

While looping through the Machine Groups (and Toolpath Groups) that are loaded in the Operation Manager.

 

2>

Read the data directly from a Machine Definition (MD) file.

[Masako Nohara Genetec]

I'd like to read from the machine group that are loaded in the operation manager.

[Roger Martin from CNC Software]

mimi,

 

I believe that data is stored (or I should say accessed using its methods) using the all encompassing CNCMachine class and it appears that the header data for it is not included as part of the SDK.

*Disclaimer: I could be all wrong here, since this is the only way I know how to do this.

 

I would suggest sending a message [sDK_at_mastercam.com] stating your need ->

I'd like to get values from Op.feed rate limits in the "General Machine Parameters" into my application.