Motionmaster Info needed

[ny_winemaker]

I recently was given a program from a 2000 MotionMaster with a ***or 8055 controller. In looking thru the code they use U & W for the rotary axis. This isn't standard and I don't know how MotionMaster defines their axis. I need to try and convert the g-code into points to get into MCX so I can reproduce the parts on our Thermwood 5axis. The company I work for has taken the product over and our sales guys, as usual, made promises that will be almost impossible to keep if I have to manually program this part. I do have a program from Thermwood that will convert the g-code into a dxf but I need to get the rotary axis configuration to B&C. Any help is appreacated.

[RObert TImby]

I program 5 motion masters, a royce and a dms. We have 8055 ***ors on them but we call out bs and cs for the 4th and 5th axis. Shot me an email and i will look at it but i can not promise anything.

[Guest CNC Apps Guy 1]

Yeah, every MotionMaster I've seen uses X, Y, Z, B and C, not U and W.

[KalCam]

I have progammed both flamer and thermwood 5-axis routers, totaly different animals IMHO, I would prefer to reprogram from the cad file to get clean code.