X4 Verify Crashing

[Josh T™]

What Gives???? No matter if I verify with normal stock, STL, or a Solid verify runs to about 25% and bombs out. Didn't have this issue with X3. Anyone else get this and is there a work around???

 

TIA

Josh

[spade117]

No issues here.

[Columbo™]

works better that the new forum....

[Mr. Wizzard]

What are your tolerances set to. I've found with larger toolpaths, setting them to .005 usually will get me through the larger toolpaths.

[MAS58]

I updated my video driver and it is better. It will still crash on big files.

[grav400]

My experience is it's all computer and graphics card.

[Dan@home]

My experience is it's all computer and graphics card.

 

 

Not so... I have close to the best you can buy and it still happens to me all the time, no matters what I have tried.

Happens on large toolpaths. Turn off true solids in verify but you won't be able to rotate it while it runs.