x5 transform toolpath

[ken wong]

in x4 i used alot transform toolpath to generate for 2 work station with G54 AND G55 but in X5 , i can not make it happen

do i miss something

[Guest]

Try this

[ken wong]

not work

[Guest]

not work

 

for the heck of it, can you try a different post and see if it works?

 

What I did works here in a stack X5 post

[ken wong]

post i use mpmaster update from x4

and one more thing strange here is i open x4 made transform toolpath then post in x5 it post correct with g45 g55 but if i generate ,save then post , g54 g55 gone

[Guest]

post i use mpmaster update from x4

and one more thing strange here is i open x4 made transform toolpath then post in x5 it post correct with g45 g55 but if i generate ,save then post , g54 g55 gone

 

Well, make sure you have given it a rectangular distance or it won't post different work offsets.

 

The changes in the Toolpath Transform may likely mean you have to change a setting to get the same output in X5.

[ken wong]

i try other x5 post but not luck only g54 no g55

[ken wong]

thanks Jparis !

 

yes it is working by way u say , but in x4 i do not put value in rectangle , that means when i open x4 file i have to change setting in setting

[mario]

with x5 it's not possible to tranform from another machine

with x4 is possible is strange

[Guest]

with x5 it's not possible to tranform from another machine

with x4 is possible is strange

huh?