ken wong
-
Posts
128 -
Joined
-
Last visited
Recent Profile Visitors
1,276 profile views
ken wong's Achievements
-
Hi everybody! I have to cut slot 2.0x.08 and .32 deep in Caldie tool steels The customer said this familiar to s7 but harder right now i use .0625 end mill 4-flute run 120sfpm and .0001 fpt depth at .012 like harvey tools suggest. But tool keeps broken every 3 slots Please advice if you guys have experience with this material Thanks and Thanks alot
-
in 2023 is perfect toolpath i look for
-
Thank you , DBronson I will try tomorrow on machine
-
Hi everyone! I want to machine bronze color surface using 4 or 5 axis machine. how to control tool axis in order my tool always normal to gray surface thanks files attached test unite tool path.mcam
-
Thanks! I know and I did set that but like i say tool only stop on collision only and not show cutting fixture
-
in verify I have display of stock , fixture , tool ... how do i can verify if the tool touch the fixture. I made the test so that tool will cut the fixture . But why it not show up in verify?
-
how does slotting solve this problem? adjusting the ramp pitch? i mean use thread toolpath but pick slotting saw tool
-
I avoid this problem by not using thread mill tool definition in stead of it i use slot mill , and i don not have any problem
-
Turn off depth of cut or put + value in top of stock
-
Hi! I'm using the generic Haas 4 axis post, for rigid tapping . How to change in post in order feed come out by pitch (1/n thread tap)
-
I am sorry for giving not much information , the part is from aluminum 6061 with tol:+/-.005 with quality 5pcs only but we really care about both end shape with sharp corner how to machine it we have full 4 axis and full 5 axis. 3d printing, edm or die is not an option my boss said it was machined by some other company before
-
how to make this 2 end off this part Pivot Head.mcam
-
yes , we contact them and wait for new psb file and for now we come back to 2018 thanks every people help me go right direction , thanks
-
btw this post we bought from inhouse when we work with x6
-
reseller say we need new post . but i want to ask mastercam community first
