How do I change the .nc file name.

[millman2002]

Hi All:

If I start a new mc9 file and save it as "new port.mc9" and post my nc file. Then I see my spelling mistake. It should be "new part.mc9". I can rename my mc9 file and resave it. But when I repost the nc file it still comes out as new port.nc not the corrected name Where in mc9 do I change it so it will post the corrected file name..

 

Tkanks

Gary

[Dean Lindblad]

Update your nci destination in the op manager.

[chris m]

That seems unusual, but, to answer your question: when you click "Post" you'll get the post dialog box which should allow you to tell Mastercam to ask for a file name before saving the .nc file by selecting the "Ask" checkbox instead of "Overwrite". When MC asks if you want to save your file you should be able to change the name.

 

C

 

[ 04-18-2003, 12:06 PM: Message edited by: chris m ]

[Rekd™]

millman,

 

Open Operations manager, select all operations, right click and select Options/Change NCI Destination. It will default to the MC9 name. Click OK.

 

'Rekd teh WCS is kicking my xxxx!

[millman2002]

Thanks rekd.. that was just what i was lookin for..

Gary