fanuc OT error 085

[steveo25]

Has anyone had any issues with a fanuc OT control not reading? It was working and then when I tried to send it a .nc file I would get a 085 Which is the error code for "COMMUNICATION ERROR When entering data in the memory by using Reader / Puncher interface, an overrun, parity or framing error was generated. The number of bits of input data or setting of baud rate or specification No". of I/O unit is incorrect.

 

I changed the .nc file to a standard .txt and still nothing. I am able to send to all of the other 4 fanuc controls that we have out in the shop but not this one. The "baudrate" parameter did not change in the machine. We are using wireless transfer and cnc predator to send the programs. The program format is all correct, it wont even receive a program that has been proven countless times. I dont have any experience with this kind of issue so any suggestions would be greatly appreciated.

Thank you

[Guest]

IIRC, that error on a Fanuc mean the wiring is wrong.

 

 

Check your connection wiring, your 2&3 pins may need to be swapped.

 

Don't know who set up your wireless but maybe contact them?

[steveo25]

Ok thanks for the reply. Our maintenance man set it up and hes stumped. Might be time to send in a professional.