Location of Staged Tool Callout

[Justin Beebe at Folsom Tool]

I need to put my Staged Tool callout on its own line or my machine does not recognize it.

 

Here is what I have:

 

N100 G0 G17 G20 G40 G80 G90

N110 (FACE TOP)

N120 (TOOLPLANE NAME - TOP)

N130 T1 M06 (3.00 FACEMILL WITH .125 RADIUS)

N140 (MAX - Z12.25)

N150 (MIN - Z11.2)

N160 M61 (A-AXIS UNLOCK)

N170 M63 (B-AXIS UNLOCK)

N180 G0 G17 G90 E1 B0. A0.

N190 M60 (A-AXIS LOCK)

N200 M62 (B-AXIS LOCK)

N210 G0 X0. Y-3.45 S5000 M3

N220 H1 Z12.25 M8 T16 {--------------- I need this T16 on its own line

N230 G94 Z11.396

N240 G1 Z11.207 F100.

 

 

This is what I need:

 

 

N100 G0 G17 G20 G40 G80 G90

N110 (FACE TOP)

N120 (TOOLPLANE NAME - TOP)

N130 T1 M06 (3.00 FACEMILL WITH .125 RADIUS)

N140 (MAX - Z12.25)

N150 (MIN - Z11.2)

N160 M61 (A-AXIS UNLOCK)

N170 M63 (B-AXIS UNLOCK)

N180 G0 G17 G90 E1 B0. A0.

N190 M60 (A-AXIS LOCK)

N200 M62 (B-AXIS LOCK)

N210 G0 X0. Y-3.45 S5000 M3

N220 H1 Z12.25 M8

N225 T16 {--------------------Need T16 on it's own line

N230 G94 Z11.396

N240 G1 Z11.207 F100.

 

The post is a custom Fadal Post from In House Solutions. If seeing any sections of the post will help in fixing this issue I can post them.

 

Thanks

[Columbo™]

The post is a custom Fadal Post from In House Solutions. If seeing any sections of the post will help in fixing this issue I can post them.

 

Couldn't you just send the post back to in-house for the quick fix?

 

just sayin

[K2csq7]

Justin are you familiar with the post debugger?

[K2csq7]

ALWAYS BACKUP POST FIRST!!!!!!!!!!!!!!!!!!!

 

 

Here is a line from the ptlchg_com postblock of an mpmaster post...

 

 	pbld, n$, "G43", *tlngno$, pfzout, scoolant, next_tool$, e$

 

if you change it to...

 

 	pbld, n$, "G43", *tlngno$, pfzout, scoolant, e$
 	pbld, n$, next_tool$, e$

 

it should do what you are looking for...

[Justin Beebe at Folsom Tool]

Thanks for the replies. I can send this post to In House but an edit like this shouldn't be to hard. If I have a major issue I send the post to my reseller then they send it to In House. They have always done an excellent job and get all my custom posts dialed in perfectly. I think Kieth A-1 has the solution. I'll give it a try tommorrow.

 

Thanks

[Justin Beebe at Folsom Tool]

Keith A-1 that worked perfectly. Thanks for the help.

[K2csq7]

Glad to help Justin Beebe at Folsom Tool!!!!

 

an edit like this shouldn't be to hard

^^^^^^^^^^^^^I'm all over these!!!!!!!!!!!!!!!!