G10 machine maintenance

[Rocketmachinist]

I just finished cutting a little bit of g10 on a VF4. It took me forever to clean the machine and it also gave me so much hassle when it came to draining the machine. What precautions do you guys use when cutting this stuff so there is an easier clean up and nicer to the machine?

[haasvf2]

When I run glass I use a Grizzly dust collector to get as much as I can. I also use those white cloth filters for AC and heating units on my coolant tank to filter out the particles going into the tank. It works pretty well, I haven't had dump the tank after using a filter. It also works when I cut cast iron.

[Mic6]

I use coolant(when possible) and lay a shop rag, (we use terry cloth style from cintas) over the coolant catch pan to collect as much of the chips/dust as possible.