HOW TO GET RID OF G94, MPMASTER POST

[RIKS]

I am runnning the mpmaster post on hurco machines, i am wondering if there is a way to get the g94 not to post or if there is a better post to use.

[K2csq7]

Always back up your post first.

Welcome to the forum.

Find this section in your post

 

# --------------------------------------------------------------------------
# Feed mode G code selection
sg94	: "G94"  	#UPMG94
sg94d   : "G94"  	#DPM, See pfcalc_deg if you use another gcodeG94
sg93	: "G93"  	#InverseG93
sg95	: "G95"  	#UPR G95   	#set with mi6$
sgfeed : ""      	#Target for string

 

Change it to this

 

# --------------------------------------------------------------------------
# Feed mode G code selection
sg94	: ""  	#UPM           		removed g94 from quotes	keith 4-12-11
sg94d   : ""  	#DPM, See pfcalc_deg if you use another gcode removed g94 from quotes keith 4-12-11
sg93	: ""  	#Inverse removed g93 from quotes keith 4-12-11 
sg95	: ""  	#UPR    	#set with mi6$   removed g95 from quotes keith 4-12-11
sgfeed : ""      	#Target for string

 

This way you have not really deleted anything and if in the future you would like to use it again it is no big deal.

[RIKS]

thank you, that worked great.