verify

[Marty A]

hello all does this happen to anyone else. when i hit alt o to bring my operations manager up all my tool paths are drawn again before my op manager comes up. its not a problem just curious plus i would like to make my colors darker but can't seem to get them to stay dark. again just curious.using 9.1 level 1

 

motty

[Zero]

alt+t will turn them off and this shouldn't happen afterwards.

 

HTH

[Marty A]

thanks zero it worked ok

 

 

motty

[Guest CNC Apps Guy 1]

If you find it's taking a "while" to bring up the toolpaths if you have them shown, you can (with the shading turned off) go to Screen, Configure, go to the screen tab, and turn off "Enable Open GL Drawing" and this will speed things up too.

 

HTH

[Marty A]

thanks james it was taking a while not real long. i will try this.

 

 

motty