EZ-Path post help

[MSL]

Hi all,

We have a Bridgeport EZ-Path lathe that I did some modifications to the post. Everything works fine, but the last thing that I need to get fixed is the home position. I’m using ” user defined” and plugging my numbers.

I want my first and last rapid move be the same but somehow my last rapid move pops off same as my next tool start position. I want line #0003 and 0076 be the same. How can I do this?

 

0000 EZPATH|SX|ARA|CLIFF 0010 MODE|INCH TUE MAY 10 14:34:01 2011

0001 TLCHG I2 T02 02

0003 RAPID ABS X8.0000 Z2.0000 <----------------

0005 SETRPM S0500

0006 RAPID ABS X4.7000 Z0.7200

0007 AUXFUN M8

0008 LINE ABS X4.7000 Z0.6200 F.002

0068 LINE ABS X6.9414 Z0.0204 F.002

0070 RAPID ABS X6.9414 Z0.0204

0076 RAPID ABS X3.0000 Z2.0000 <-------------------

0072 AUXFUN M5

0073 AUXFUN M9

0074 TLCHG I3 T03 03

0076 RAPID ABS X3.0000 Z2.0000

0078 SETRPM S0500

0079 RAPID ABS X4.6264 Z0.8300

0080 AUXFUN M8

0076 RAPID ABS X3.0000 Z2.0000

0118 AUXFUN M5

0119 AUXFUN M9

0120 AUXFUN M0

Thanks in advance.

Ara.