Post Tool Table at end of program?

[Zoffen]

How would you post a tooltable at the end of your program right after an m30?

Tried Ptooltable at Peof but it only output the first tool????

 

any hints?

 

thanks a bunch!

[jeff]

Is it the pwrtt command?

 

Edit: Have you tried ptooltable?

[Paul Decelles]

You may be able to simply switch the output to an external file and then merge it at the end (that is if subout$ 3 is not already used in your post). Something like this should work

 

ptooltable  	#Tooltable output
 	extprg$ = 1  #Enable ext file and clear contents
 	!subout$, subout$ = 3  #Save current subout setting and switch to ext
 	sopen_prn, *t$, sdelimiter, pstrtool, sdelimiter, *tlngno$,
   	[if comp_type > 0 & comp_type < 4, sdelimiter, *tloffno$, sdelimiter, *scomp_type, sdelimiter, *tldia$],
   	[if xy_stock <> 0 | z_stock <> 0, sdelimiter, *xy_stock, sdelimiter, *z_stock],
   	sclose_prn, e$
 	xy_stock = 0  #Reset stock to leave values
 	z_stock = 0   #Reset stock to leave values
 	subout$ = prv_subout$  #Switch output back to saved state

 

and

 

peof$        	#End of file for non-zero tool       	
 	pretract
 	comment$
 	if stagetool = 1 & stagetltype = 2, pbld, n$, *first_tool$, e$
 	n$, "M30", e$
 	mergesub$
 	clearsub$
 	mergeaux$
 	clearaux$
 	mergeext$  #Merge in the tooltable info
 	clearext$  #Clear the ext file
 	"%", e$