CYCLE84

[Columbo™]

Hi peeps,

 

We ahave a DMU50 and need to do a rigid tapping operation. We have never tested the post for this cycle yet. The question is do we need a G95 or a G94 for this cycle to work correctly.

 

I know in other machines we use G95. BUT this is a DMU I'm talking about. Could the G95 be hidden inside the cycle?

 

Seems that our DMG regional office moved and we are waiting for a new contact to respond.

 

Thanks

[dougm]

here is mine

1/4-20 tap

500 rpm 25 ipm

.600 deep

G94

 

 

 

 

 

;MASTERCAM - X

;MCX FILE - C:\USERS\DOUGM\DESKTOP\TEST.MCX

;MATERIAL -

;PROGRAM - TAP.MPF

;DATE - JUL-22-2011

;TIME - 11:24 AM

;POST DEV - IN-HOUSE SOLUTIONS INC.

 

;T4180 - 1/4-20 TAP RH - DIA. - .25"

N100 G700 G17 G40 G90

N110 G54 D1

N120 CYCLE800(1,"DMG",0,27,0,0,0,0,0,0,,,,-1)

N130 TRAFOOF

N140 ROT

N150 TRANS

N160 G0 SUPA D0 Z-.1

N170 SUPA X-15 Y-.1

N180 SUPA B0 C0

 

; 1/4-20 TAP RH

;TOOLPLANE NAME - OP1

N190 T4180 M6

N200 G0 SUPA D0 Z-.1

N210 SUPA X-15 Y-.1

N220 G54 D1

;MAX - Z.25

;MIN - Z-.6

N230 CYCLE800

N240 S500 M3

N250 G90 G0 G17 X-2.5625 Y-.875

N260 Z.25

N270 M08

N280 G94

N290 MCALL CYCLE84(.25,0,.25,-.6,,,3,,.05,0,500,500,3,0,0,0,,)

N300 X-2.5625 Y-.875

N310 X2.5625 Y-.875

N320 X2.5625 Y.875

N330 X-2.5625 Y.875

N340 MCALL

N350 M09

N360 M5

N370 G0 SUPA D0 Z-.1

N380 SUPA X-15 Y-.1

N390 SUPA B0 C0

N400 G90

N410 M30

%

[Columbo™]

here is mine

1/4-20 tap

500 rpm 25 ipm

.600 deep

G94

 

 

 

 

 

;MASTERCAM - X

;MCX FILE - C:\USERS\DOUGM\DESKTOP\TEST.MCX

;MATERIAL -

;PROGRAM - TAP.MPF

;DATE - JUL-22-2011

;TIME - 11:24 AM

;POST DEV - IN-HOUSE SOLUTIONS INC.

 

;T4180 - 1/4-20 TAP RH - DIA. - .25"

N100 G700 G17 G40 G90

N110 G54 D1

N120 CYCLE800(1,"DMG",0,27,0,0,0,0,0,0,,,,-1)

N130 TRAFOOF

N140 ROT

N150 TRANS

N160 G0 SUPA D0 Z-.1

N170 SUPA X-15 Y-.1

N180 SUPA B0 C0

 

; 1/4-20 TAP RH

;TOOLPLANE NAME - OP1

N190 T4180 M6

N200 G0 SUPA D0 Z-.1

N210 SUPA X-15 Y-.1

N220 G54 D1

;MAX - Z.25

;MIN - Z-.6

N230 CYCLE800

N240 S500 M3

N250 G90 G0 G17 X-2.5625 Y-.875

N260 Z.25

N270 M08

N280 G94

N290 MCALL CYCLE84(.25,0,.25,-.6,,,3,,.05,0,500,500,3,0,0,0,,)

N300 X-2.5625 Y-.875

N310 X2.5625 Y-.875

N320 X2.5625 Y.875

N330 X-2.5625 Y.875

N340 MCALL

N350 M09

N360 M5

N370 G0 SUPA D0 Z-.1

N380 SUPA X-15 Y-.1

N390 SUPA B0 C0

N400 G90

N410 M30

%

 

 

Thanks....we did try with the G94 and it worked...