Drill/Counterbore Combination

[SpecialtyTool]

Does anyone know where I can find a drill/counterbore combination tool? I need a 7mm drill with an 11mm counterbore. Im just drilling plastic so I don't need the highest quality. I checked McMaster Carr and MSC but neither have the size I need.

[jeff]

Does anyone know where I can find a drill/counterbore combination tool? I need a 7mm drill with an 11mm counterbore. Im just drilling plastic so I don't need the highest quality. I checked McMaster Carr and MSC but neither have the size I need.

 

Kinda of ironic given your username eh?

 

I don't know of any that sell metric offhand, I wouldn't think that you'd have to have it custom made, although your cutter resharp guy should be able to whip one up easily.

[SpecialtyTool]

Kinda of ironic given your username eh?

 

I don't know of any that sell metric offhand, I wouldn't think that you'd have to have it custom made, although your cutter resharp guy should be able to whip one up easily.

 

It is kinda funny. We don't even make tools anymore. Im just going to have a drill ground down. Im only cutting nylon so Im not too worried. Im doing 300 parts so I save hours of cycle just by eliminating 1 tool change.

[Odin]

Look into Allied machine and engineering. they have special drill/c-bore and drill/chamfer drills.