Add line

[zebra]

Horizontal machining center.

How to make like this:

 

G30 G91 Z0

G0 G90 B0

G0 G90 G54 X0 Y0 S2000 M3

 

Mastercam always doing like this:G0 G90 G54 X0 Y0 B0 S2000 M3

I need retract pallet to referents point (Z) and rotate pallet.

[Guest CNC Apps Guy 1]

When do you want this to happen? There's a few possibilities...

[zebra]

When do you want this to happen? There's a few possibilities...

I need this before rotate to any angles and after tool change.

for example:

 

M6(DRILL 10)

G0 G90 B90.

G0 G90 G54 X0 Y0 S900 M3

G43 Z50. H1

G81 G99 Z-10. R5.F100

G80

G30 G91 Z0

G0 G90 B180.

G0 G90 G54 X0 Y0 S900 M3

G43 Z50. H1

G81 G99 Z-10. R5.F100

G80

G30 G91 Z0

G30 G91 X0 Y0

[Trevor Bailey]

the mpmaster horizontal post is already set up like this. it is free, use it.

[Guest zebra]

the mpmaster horizontal post is already set up like this. it is free, use it.

 

I mean in separate lines. First G0 G90 B0, second G0 G90 G54 X0 Y0