X6 Lathe copying operations

[westerfieldc]

Hello all, I just noticed something in X6. I have a lathe drill path and wanted to follow it with a lathe tap path so I copied the drill op and pasted it in next. I then under parameters selected the tap operation and then selected the tap I wanted to use. When I do this copy operation it never updates the feeds and speeds. Now if I create a new path it updates.

 

I just wanted to see if anybody else saw this or if it was just me.

 

Thanks

[Sbarner]

I think you probably have "Lock Feedrates" enabled (checked) in the configuration. If you uncheck this, it'll probably update next time you do it.

[Scott Lundin Shopware Inc.]

Go to settings/configuration and remove the check mark from the "lock feedrates" option.