unsupported function call

[cncman74]

i am still using V9.0 works fine. But i have been getting this warning when i go to post something.

 

Warning-unsupported function call

Recompile with new m_*.h files, link with new m_*.obj files

 

What does that mean? Has something become corupted and i need to reinstall? Or is it just a matter of reinstall an add-on?

[cadcam]

You need to update to at least 9.0 SP1, Have you done this?

[Roger Martin from CNC Software]

Sounds like you have a mis-matched MP.DLL for the version of Mastercam Mill you are ruuning.

(You CANNOT use MP.DLL for v9.1 with v9.0)

 

What is the Version number of the MP.DLL on your system ?

 

code:

---

To determine the version of MP.DLL (or MPL.DLL, MPWIRE.DLL)

1. Locate the desired file using Windows Explorer (in the Chooks folder of the Mastercam installation).

2. Right-click on the DLL file.

3. Select "Properties" off the drop-down menu.

4. Select the "Version" tab in the "Items name" list.

5. Select "File Version".

6. Read the "Value" (to the right).

---

[cncman74]

that's it. versions no matching. I will just have to update.