Logo help?

[Newbieguy]

Hello, I do some reverse engineering for a drag racing buddy every once in a while as a favor. Anyhow, long story short, he asked me to reverse engineer his logo, and put it in an IGES format so he could engrave his logo on the bigger racing parts he makes. I told him I didn't really have time to play with this right now, but I would put it on Mastercam's forums to see if someone does. (I'm guessing someone with Masercam Art could knock this out in no time?) And yes, he would be willing to pay for your time Ugh - can't figure out how to upload JPEG to this... email me at [email protected] and I'll email the JPEG to you for a quote.

[CJep]

You don't necessarily need to bring the geom into "Art"

 

You could use the line, arc, spline geom to write a pocket toolpath and if he needs it to follow a surface the toolpath could be projected on that surface.

 

If you have a jpeg of good quality you can use the raster to vector c-hook to covert it to line, arc, spline geom.

[Newbieguy]

You don't necessarily need to bring the geom into "Art"

 

You could use the line, arc, spline geom to write a pocket toolpath and if he needs it to follow a surface the toolpath could be projected on that surface.

 

If you have a jpeg of good quality you can use the raster to vector c-hook to covert it to line, arc, spline geom.

 

Thank you CJep. It worked good enough for him, so problem is solved!!!