Post setup on server

[B.D.]

What is the correct way to put all my post on our server so that everyone is using the same.

 

TIA

[spade117]

Hvae a location where the posts are, and make sure the mapping is correct from each person's workstation that is using the posts.

[Guest]

I copy the

 

.control

.mmd

.pst

 

& psb if it exists

 

into whatever folder I want on the server.

 

I then open Mastercam, go to

 

Settings >> Config

 

Default machines, I then navigate to my folder on the server.

 

 

The I load the machine def and make sure the control def and post are properly mapped to the server.

 

Once everything is linked, you can go to everyone's config and change their default machine to the server.

 

********NOTE*****************

I remove any local copies of the files.

[B.D.]

You lost me at default machines......which one is it????

And it does Mill Lathe and Wire correct??

 

 

 

 

Thanks,

[Guest]

Look on the tree to the left, under Converters

[B.D.]

OMG......htf did I miss that.....

 

 

Thanks,