Matching tools with H and D

[sir_ser]

Except for resident tool libraries,all other tools don`t match the tool # for diameters and height.

Any advice would be helpfull.

[Bill Henderson]

Except for resident tool libraries,all other tools don`t match the tool # for diameters and height.

Any advice would be helpfull.

 

 

In Control Definition see tool register.

 

Also see my posting at this thread...

My link

 

If the tool library is assigning numbers from said library and you want them in order i.e. T1 T2 T3

 

see the pictures at that thread.

[Bill Henderson]

Also see the thread and its counter thread in it's entirety.

 

If you change or edit an existing tool verify the D and H values changed accordingly.

 

If you are editing a tool you must select the edited tool for each operation that uses the edited tool. That make sense? It will prompt you to change all operations that use this tool... hit yes and reselect the tool per operation prior to regenerating.

 

It does to me anyhow.