Mazak FH6800 with Fusion control.

[Tinhman]

Good morning all,

I am in the process to implement the Dynamic milling for this machine and things worked out just fine (better cycle time and tool life).

But there is 01 thing is botherd me is the choppy finish on this toolpath.

I usually have to leave about .03 to .035" for my finish tool.

I wonder, this is nornal or I am missing something. I am using G61.1,K70 for all roughing pass.

What esle am I missing.

 

Any input will be a big help.

 

Thanks in advance.

[Joe788]

That's just a side effect of dynamic milling. It's strictly a roughing operation. Do you have the arc filter set on 2:1?

[Tinhman]

Yes, I had it set at 2:1 and the total tolerance .005