Modding post to use lead in/out with polar interp?

[Zoffen]

I'm looking for a way to mod my post so i can use polar interp with a lead in and out and possibly with 2d high speed toolpaths.

If i could get the post to output the conversion starting at the initial positioning line it would work sweet, but it doesn't. it has that in c/x code. How can i make the position happen in polar interp? I've read alot of posts here and most of the time all the answers that are given is that you have to draw your leadin from C0. which i think is bullxxxx. You should be able to do ALL of the milling toolpaths in polar interp. I can't see why this couldn't be done with some post modding. Possible forcing it to think your in cutpos=one at the toolchange. not sure how to do this but i want to make it happen. Thanks for the help!

[roland_1]

better put example what you want to get.

[Zoffen]

I want the post to start the polar interp mode before it goes down to cut depth, not after the lead in move.

There are alot of posts about trying to make this work but it seems that many have given up!?!?!?