STL Files

[zsinclair]

Hi all. I was refered here by a friend of mine who was not able to help me. He said he has had a lot of help here.

 

I have just switched over to X6. My problem is when tying to do a "Save Some" and save a solid as an STL file, it will save the file, however, when I bring it into the verify it come in rotated 180 degress and off to the side. I know there is the Stock Model toolpath but I am doing a realitvly simple extrusion so that would really be unecessary. I was hoping someone has seen this before. Thanks!

[Guest]

Wrong forum, moved to the main

[GoetzInd]

Make sure you are saving in the same plane as you are using in the stock model op.

 

Mike

[EAGLE27]

Hi all. I was refered here by a friend of mine who was not able to help me. He said he has had a lot of help here.

 

I have just switched over to X6. My problem is when tying to do a "Save Some" and save a solid as an STL file, it will save the file, however, when I bring it into the verify it come in rotated 180 degress and off to the side. I know there is the Stock Model toolpath but I am doing a realitvly simple extrusion so that would really be unecessary. I was hoping someone has seen this before. Thanks!

I've found that if you go into view manager and set to top it will come in correct.

[zsinclair]

Yeah that got it. Thanks a lot guys I appreciate it.