Tool Settings defaults ??

[Gutty]

Hey guys, see attached image, i want to know how to permanently change the defaults marked in red. Put up with this for years and years, then about a year or 2 ago i finally got them set as i wanted, but for some reason in the last week or so the defaults have reset. So now every new job i start i have to go and change the Tool Settings.

 

Basically i want a default program number of "1" instead of "0"

I don't want the default material as alluminium, i want it as "none"

And i want "assign tool numbers sequentially", "warn of duplicate tool number" and "use tools step, peck, coolant" always turned on.

 

Any help with this would be much appreciated. It's doing my head in ! And my reseller isn't much help...

 

Thanks

Matt

 

[Scott Lundin Shopware Inc.]

Call up a machine group in the operations manager. Expand properties, click on files folder, click the exclamation mark button for operation defaluts. In the new window navigate to properties/tool settings and change your settings in there. Then green check your way out of all the screens. See pics below.

[Gutty]

Thank you so much, it's been driving me crazy.

 

You're a champion !

 

Cheers

Matt