G41/G42 in lathe rough canned cycle

[odessa]

Good Morning everybody.

Please help to resolve my problem. How can I change my postprocessor to have a cutter comp code in canned rough lathe cycle.

It's a program below:

 

%

O0001

(PROGRAM NAME - LEO 8 PRACT)

(DATE=DD-MM-YY - 11-10-12 TIME=HH:MM - 08:07)

(MCX FILE - C:\PLSNCI\LATHE NCI\LATHE TUTORIAL\LEO 8 PRACT.MCX-6)

(NC FILE - A:\LEO 8 PRACT.NC)

(MATERIAL - ALUMINUM INCH - 6061)

(POST DEV - IN-HOUSE SOLUTIONS INC.)

(TOOL - 1 - OD ROUGH RIGHT - 80 DEG. - OFFSET - 1 - INSERT - CNMG-432 - HOLDER - DCGNR-164D)

G20

(TOOL - 1 OFFSET - 1)

(OD ROUGH RIGHT - 80 DEG. INSERT - CNMG-432)

G0 G40 G80 G28 U0. V0. W0. T0

G54

N1 T0101

G18 G99

M155

M8

G97 S1297 M03

G0 X2.9441 Z.25

X2.8441 Z.2

G50 S6000

G96 S1000

G71 P11 Q21 U.02 W.01 D.1 F.01

N11 G0 X.2362

G1 Z0.

X.6496 Z-.6299

Z-1.6142

X1.0433

Z-1.8898

X1.2205

Z-2.874

N21 G40 X2.8441

M9

G28 U0. V0. W0.

M05

M30

%

 

Please help if possible .

 

Thanks in advance

[Guest]

(POST DEV - IN-HOUSE SOLUTIONS INC.)

[Guest SAIPEM]

Good Morning everybody.

Please help to resolve my problem. How can I change my postprocessor to have a cutter comp code in canned rough lathe cycle.

It's a program below:

 

%

O0001

(PROGRAM NAME - LEO 8 PRACT)

(DATE=DD-MM-YY - 11-10-12 TIME=HH:MM - 08:07)

(MCX FILE - C:\PLSNCI\LATHE NCI\LATHE TUTORIAL\LEO 8 PRACT.MCX-6)

(NC FILE - A:\LEO 8 PRACT.NC)

(MATERIAL - ALUMINUM INCH - 6061)

(POST DEV - IN-HOUSE SOLUTIONS INC.)

(TOOL - 1 - OD ROUGH RIGHT - 80 DEG. - OFFSET - 1 - INSERT - CNMG-432 - HOLDER - DCGNR-164D)

G20

(TOOL - 1 OFFSET - 1)

(OD ROUGH RIGHT - 80 DEG. INSERT - CNMG-432)

G0 G40 G80 G28 U0. V0. W0. T0

G54

N1 T0101

G18 G99

M155

M8

G97 S1297 M03

G0 X2.9441 Z.25

X2.8441 Z.2

G50 S6000

G96 S1000

G71 P11 Q21 U.02 W.01 D.1 F.01

N11 G0 X.2362

G1 Z0.

X.6496 Z-.6299

Z-1.6142

X1.0433

Z-1.8898

X1.2205

Z-2.874

N21 G40 X2.8441

M9

G28 U0. V0. W0.

M05

M30

%

 

Please help if possible .

 

Thanks in advance

 

If it's a FANUC Control, don't bother.

 

All it will do is generate an error when you try to run it.

You can not use G41,G42 in canned roughing on a FANUC.

It MUST be called BEFORE the canned cycle.

[odessa]

I won't bother but interesting.

[jeff]

If it's a FANUC Control, don't bother.

 

All it will do is generate an error when you try to run it.

You can not use G41,G42 in canned roughing on a FANUC.

It MUST be called BEFORE the canned cycle.

HUH?

Since when?

I've ran Fanuc lathe controls for years and always used canned cycles with G41/G42 inside the programs

 

%
O0000(TEST)
(OCT. 19 2012)
(STEEL INCH - 1030 - 200 BHN)
G10L50
N1241P1R-180000
N1241P1R-300000
G11
(T1-OD ROUGH RIGHT - 80 DEG.)
G20
G54
N1T0101
G18G99
M24
G97S181M03
G00X4.2231Z.1116
X4.1231Z.0616
G50S3600
G96S200
G71U.1R0.
G71P101Q201U.02W.01F.01
N101G00X1.3403S200W0.
G01G42X2.Z-.2683
Z-.7813
G02X2.4375Z-1.R.2188
G01X3.4634
N201G40X4.1231Z-1.3299
G28U0.W0.
M05
M30
%

 

used unaltered MPLMASTER.PST with wear comp

[odessa]

I use MPLMASTER with wear comp. and I have that Ihave