Canned Cycles not posting

[66jehucal]

I'm using the MPLFAN post and I have checked the subprograms in the controls. I still do not get canned cycles in my program. Does anybody have any suggestions?

[CJep]

Using the Mplfan post I get this output using a canned rough toolpath,....

 

Subprograms and canned cycles are two different code formats, make certain the canned routines are turned on in the control def. Open the control def, go to machine cycles in the control topics and open the page for lathe canned cycles.

 

G20

(TOOL - 6 OFFSET - 6)

(OD ROUGH RIGHT - 80 DEG. INSERT - CNMG-432)

G0 T0606

G18

G97 S153 M03

G0 G54 X5. Z.1

G50 S3600

G96 S200

G71 U.1 R0.

G71 P100 Q102 U.02 W.01 F.01

N100 G0 X3. S200

G1 Z-1.7813

G2 X3.1875 Z-1.875 I.0938

G1 X3.7682

G3 X4.0584 Z-1.9732 K-.1563

G1 X4.9598 Z-3.0999

G3 X5. Z-3.2044 I-.2612 K-.1044

N102 G1 Z-4.5

G0 Z.1

G28 U0. V0. W0. M05

T0600

M30

%