Generic Haas VF-TR_Series 5X Mill posting z on A B moves

[Darin]

Hello,

 

 

Is there a way to have the post not post a z move on the WCS and axis rotation line? I changed the post to post a WCS for every rotation or toolchange and it posts like below.. The problem is that the x,y,z,b,a are all on the same line and it moves all at once and sometimes crashes unless I slect force tool change.. I want the B, & A to moves on a seperate line by them selfs like it would if I had it set back to only post one WCS for all rotations and tool change... I tried to use approach and retract reference points but it still post x,y,z,b,a on one line....

 

 

With WCS set to all tool changes

 

 

G20

G0 G17 G40 G49 G80 G90

G0 G28 G91 Z0.

(1/8 ENDMILL 1.0" OUT OF HOLDER |TOOL - 4|DIA. OFF. - 4|LEN. - 4|TOOL DIA. - .125)

(G54 WCS - MILLS TOP 1/4 DEEP CUTOUT WITH 1/8 E.M.)

M11

M13

T4 M6

G0 G54 G90 X5.0358 Y1.244 B0. A0. S8500 M3

M10

M12

G43 H4 Z12.1982 M8

Z8.3982

G1 Z7.9482 F45.

G41 D4 X4.9108 Y1.4605 F15.

X4.8638 Y1.5419

Y1.4814

G40 Y1.2314

G0 Z11.9482

X5.0575 Y1.2565

Z8.3982

G1 Z7.9482 F45.

G41 D4 X4.9325 Y1.473 F15.

X4.8491 Y1.6174

G3 X4.8388 Y1.6147 I-.0048 J-.0027

G1 Y1.4814

G40 Y1.2314

G0 Z12.1982

(G59 WCS - MILLS 107 DEG CUTOUT FLAT ON RIGHT SIDE OF PART WITH 1/8 E.M.)

G59 X.0375 Y6.8182 Z9.0152 B73. A-90. < ---------------------------------------------------------------- Crash needs at least the Z move gone ------------->

Z5.2152

G1 Z4.6282 F45.

G41 D4 X.2125 F15.

G3 X.2725 Y6.8782 J.06

G1 Y7.9482

G40 Y8.1232

G0 Z8.6282

X.0625 Y6.8182

Z5.2152

G1 Z4.6282 F45.

G41 D4 X.2375 F15.

G3 X.2975 Y6.8782 J.06

G1 Y7.9482

G40 Y8.1232

G0 Z9.0152

(G154 P1 WCS - MILLS 107 DEG CUTOUT FLAT ON LEFT SIDE OF PART WITH 1/8 E.M.)

G154 P1 X-.62 Y-8.3732 Z6.096 B107. A90. <---------------------------------------------------------Crash needs at least the Z move gone----------------->

Z2.296

G1 Z1.709 F45.

G41 D4 Y-8.1982 F15.

Y-6.8782

G3 X-.68 Y-6.8182 I-.06

G1 G40 X-.855

G0 Z5.709

X-.595 Y-8.3732

Z2.296

G1 Z1.709 F45.

G41 D4 Y-8.1982 F15.

Y-6.8782

G3 X-.655 Y-6.8182 I-.06

G1 G40 X-.83

G0 Z6.096

M9

 

 

 

With it set to post only one WCS

 

G20

G0 G17 G40 G49 G80 G90

G0 G28 G91 Z0.

(1/8 ENDMILL 1.0" OUT OF HOLDER |TOOL - 4|DIA. OFF. - 4|LEN. - 4|TOOL DIA. - .125)

(G54 WCS - MILLS TOP 1/4 DEEP CUTOUT WITH 1/8 E.M.)

M11

M13

T4 M6

G0 G54 G90 X5.0358 Y1.244 B0. A0. S8500 M3

M10

M12

G43 H4 Z12.1982 M8

Z8.3982

G1 Z7.9482 F45.

G41 D4 X4.9108 Y1.4605 F15.

X4.8638 Y1.5419

Y1.4814

G40 Y1.2314

G0 Z11.9482

X5.0575 Y1.2565

Z8.3982

G1 Z7.9482 F45.

G41 D4 X4.9325 Y1.473 F15.

X4.8491 Y1.6174

G3 X4.8388 Y1.6147 I-.0048 J-.0027

G1 Y1.4814

G40 Y1.2314

G0 Z12.1982

(G59 WCS - MILLS 107 DEG CUTOUT FLAT ON RIGHT SIDE OF PART WITH 1/8 E.M.)

M11

M13

B73. A-90. <-------------------------------------------------------------- B and A are on sperate lines no crash --------------------------------->

M10

M12

X.0375 Y6.8182

Z9.0152

Z5.2152

G1 Z4.6282 F45.

G41 D4 X.2125 F15.

G3 X.2725 Y6.8782 J.06

G1 Y7.9482

G40 Y8.1232

G0 Z8.6282

X.0625 Y6.8182

Z5.2152

G1 Z4.6282 F45.

G41 D4 X.2375 F15.

G3 X.2975 Y6.8782 J.06

G1 Y7.9482

G40 Y8.1232

G0 Z9.0152

(G154 P1 WCS - MILLS 107 DEG CUTOUT FLAT ON LEFT SIDE OF PART WITH 1/8 E.M.)

M11

M13

B107. A90. <-------------------------------------------------------- B and A are on sperate lines no crash --------------------------------------->

M10

M12

X-.62 Y-8.3732

Z6.096

Z2.296

G1 Z1.709 F45.

G41 D4 Y-8.1982 F15.

Y-6.8782

G3 X-.68 Y-6.8182 I-.06

G1 G40 X-.855

G0 Z5.709

X-.595 Y-8.3732

Z2.296

G1 Z1.709 F45.

G41 D4 Y-8.1982 F15.

Y-6.8782

G3 X-.655 Y-6.8182 I-.06

G1 G40 X-.83

G0 Z6.096

M9

M5

G0 G28 G91 Z0.

M01

G0 G17 G40 G80 G90 G94 G98

G0 G28 G91 Z0.

 

Thanks

[Darin]

Any suggestion's on how to fix this in the post?

 

Thanks

[Darin]

Any suggestion's on how to fix this in the post?

 

Thanks

[bahacali]

first ,you better know ,which is the post ?

second, open mastercam go to file , edit/open external then choose a post

you can eidt whatever you want the program to display.

hope it works