active reports help

[Bill Henderson]

I have the active report customized as follows

1. setup sheet (mill).rpx
   

1. –setup sheet (man-ent-data).rpx
   
2. –setup sheet (mill-file).rpx
   

ii. –setup sheet (mill_operation).rpx

iii. –setup sheet (mill-tools).rpx

1.–toollist(detailed).rpx from msc folder

Each has been somewhat modified , but the one that seems to give me issues is the detailed tool.

I basically modified the way it looks. Removed some info I didn’t want like sfm, retract rate etc…

What seems to happen is the OAL which I changed the label text to say LOP (length of protrusion) and linked the output to OAL under fields/setup sheet/ncfile/tools… is every once and a while the first tool OAL will get repeated into the second tool.

 

For instance, T1 has OAL of 3” and T2 says the same thing but in reality is only 1.50”.

I am wondering if whether or not the type of operation is the culprit. I noticed it when I didn’t have the option of adding a tool holder on one of the older operations.

 

Anyone else see this?

 

I can upload my setup sheet if it helps. Although not sure where to put it.

 

Thanks

test.pdf