Lathe. How to flip around your modelled piece

[Thebigt]

Hello, I`m really new with the mastercam software and are in a large scale set to teach it by myself. The machining method is turning.

My problem is: How do I simply flip around my modeled piece 180 degrees so I can start programming the other side without modeling it up again.

I`m believing it has to do something with mirroring the model, but i`m not quite sure how to do it so i will get in the same quadrant but just flipped.

 

Can anyone of you experienced users please help me? I`m running MasterCam x6

[BOATDUDEGUY]

I would xform mirror then xform translate the front to origin

Hope this helps

 

I realize that description can be a bit direct for someone new to the program

I can explain it better if need be

[ajmer]

use toolpaths-->mics-->stock flip

[Thebigt]

I would xform mirror then xform translate the front to origin

Hope this helps

 

I realize that description can be a bit direct for someone new to the program

I can explain it better if need be

 

That worked great! thx!